Use .gitignore to Ignore Specific Files and Folders

Git is a powerful version control system (VCS). It allows developers to manage, coordinate, and control the contents of their workspaces, but is not without complexity. Git users often struggle with untracked local files that complicate the output of commands like git status. This guide explains the .gitignore file, which provides a handy workaround to this problem. It also describes how to create a .gitignore file, how to add files and folders to gitignore, and how to use its powerful syntax.

What is gitignore?

In a Git repository, most files are either tracked or untracked. But the gitignore file enables a third category of files. Here’s an explanation of the three types of files in a Git repository:

• Tracked: These files are already added/staged or committed to the repository.
• Untracked: These files are not yet staged or committed. The developer intends to stage or commit them at some later time.
• Ignored: These are untracked files that a developer does not want to stage or commit. Git has been told to ignore these files, so they do not appear in the input of Git commands. As far as Git is concerned, these files do not exist.

To list the tracked and untracked files in a Git repository, use the git status command. It lists all tracked files that have changed, along with the untracked files. However, it does not list any ignored files or folders. These entities are hidden, and therefore no longer shown as untracked. This removes clutter from the Git commands and makes it easier to focus on changes to relevant files.

To ignore a file or folder, add it to a file named .gitignore. This is a text file normally located in the root directory of a Git repository, although it can reside elsewhere. The preceding . character indicates gitignore is a hidden file.

Git does not automatically create the gitignore file. It must be created manually.

Each line in the file represents a different pattern, or rule, describing the files Git should ignore. The gitignore syntax includes a series of special operators for developing patterns with much larger scopes. Unfortunately, there is no Git command to create or edit the gitignore file. These actions must be performed manually.

Developers should ignore files and folders they do not plan to push, rather than leaving them in an untracked state. This avoids confusion, reduces the chance of accidental commits, and helps developers structure their workplace. Here are some types of files that are good candidates for gitignore.

• Object files and compiled code, such as .o files.
• Build output directories.
• Caches.
• System files.
• Auto-generated files, including .lock and .tmp files.
• Personal configuration or IDE files.
• Temporary test data for unit testing.
• Placeholder or stub files used during early development.
• Files containing sensitive information like passwords and keys.

Before You Begin

1. If you have not already done so, create a Linode account and Compute Instance. See our Getting Started with Linode and Creating a Compute Instance guides.

2. Follow our Setting Up and Securing a Compute Instance guide to update your system. You may also wish to set the timezone, configure your hostname, create a limited user account, and harden SSH access.

3. Ensure Git is installed on your Linode. For information on installing up Git, see the Linode guide to installing Git. Essentially:

   Debain / Ubuntu

   sudo apt install git
   AlmaLinux / CentOS Stream / Fedora / Rocky Linux

   sudo dnf install git

4. To provide an environment for testing gitignore behavior, create and initialize a test Git repository:

   mkdir testgit
   cd testgit
   git init

5. Create the example files and folders necessary to follow along with this guide:

   mkdir {subdir1,subdir2,subdir3} && touch 1.bak a.bin b.bin file1.txt file2.txt file3.txt file4.txt file5.txt file6.txt one.bak subdir1/file7.txt subdir2/file8.txt subdir3/files.log

How to Use the gitignore file

gitignore is a normal text file. It contains a set of rules telling Git what files and folders to ignore. Users must create and edit it manually. The following sections explain how and where to create the file and how to ignore files and folders. The following examples use a sample Git repository named testgit. This repository has already been created using the git init command.

This guide is optimized for Linux and Ubuntu users, but the Git commands are common to all platforms. The gitignore syntax is platform independent.

How to Create the gitignore File

Most developers add the gitignore file to the root directory of the repository. However, it can be created in any directory. The patterns in a gitignore file are always relative to the location of the gitignore directory. It is also possible to create multiple gitignore files. The rules in each file are cumulative and are processed in a relative manner.

There is no command for creating the .gitignore file. To create the .gitignore file, first, make sure you’re in the root directory of the Git project (i.e testgit). Then use a text editor, or simply the touchcommand, to create the file:

touch .gitignore

How to Add Files to gitignore

The simplest use of gitignore is to ignore an individual file. Add the full name of the file to be ignored to the .gitignore file. Each new entry must appear on a separate line.

Git ignores all files with this name no matter where they are located in the repository. A later section discusses how to ignore multiple files matching a pattern. Here are the steps required to add a file to gitignore.

1. Run the git status command to review the list of untracked files. Determine which files are not important and should not be listed.

   git status

   Untracked files:
       .gitignore
       1.bak
       a.bin
       b.bin
       file1.txt
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       one.bak
       subdir1/
       subdir2/
       subdir3/

2. Edit the .gitignore file:

   nano .gitignore

3. To ignore file1.txt, add the full name of the file to gitignore:

   File: testgit/.gitignore

   1

   file1.txt

   Note

   This pattern ignores any file named file1.txt anywhere in the Git repository.

4. Press CTRL+X to exit nano, Y to save, and Enter to confirm.

5. Run git status again and confirm file1.txt is no longer listed amongst the untracked files:

   Untracked files:
       .gitignore
       1.bak
       a.bin
       b.bin
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       one.bak
       subdir1/
       subdir2/
       subdir3/

6. A file in a specific directory is ignored in much the same way. Add the entire file path, relative to the gitignore file, as a new line in the file. For example, to ignore the file file7.txt in the directory subdir1, add another entry to gitignore, like so:

   File: testgit/.gitignore

   1 2	file1.txt subdir1/file7.txt

7. Run git status again:

   Untracked Files:
       .gitignore
       1.bak
       a.bin
       b.bin
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       one.bak
       subdir2/
       subdir3/

   Here, subdir1 is not listed because its only contents was file7.txt., which is now ignored.

How to Add Folders to gitignore

gitignore can also be used to ignore entire directories, along with any files and subdirectories in the directory. To ignore a specific directory, append a / symbol to the end of the directory name.

This example explains how to ignore the subdir2 directory in gitignore.

1. Add a new entry to gitignore consisting of the name of the directory to ignore:

   File: testgit/.gitignore

   1 2 3

   file1.txt subdir1/file7.txt subdir2/

2. Confirm the directory is now on the ignore list. Neither the directory nor the files it contains should be listed under untracked files:

   git status

   Untracked files:
       .gitignore
       1.bak
       a.bin
       b.bin
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       one.bak
       subdir3/

Debugging gitignore

Git provides a debug command for determining why a file is being ignored or considered. Use the check-ignore command and the -v verbose flag. Git lists every rule that applies to the file.

git check-ignore -v subdir2/file8.txt

.gitignore:3:subdir2/    subdir2/file8.txt

gitignore Syntax and Patterns

gitignore is equipped with a powerful and flexible set of special operators for filtering files on a highly granular level. The gitignore syntax uses wildcard and exclude symbols to add multiple files or remove other files from the set of ignored files.

This section describes the different characters comprising the gitignore syntax. The check-ignore command illustrates how the gitignore syntax affects different files. For more extensive information about the syntax, consult the gitignore documentation.

The Wildcard Symbols

The * symbol matches zero or more characters, excluding only the / character. For example, the rule *.bak ignores all files with the .bak extension, including 1.bak and one.bak. Wildcards can be used in both file and folder names.

1. Add a new line to .gitignore:

   File: testgit/.gitignore

   1 2 3 4

   file1.txt subdir1/file7.txt subdir2/ *.bak

2. Use git-status to confirm both .bak files are unlisted:

   Untracked Files:
       .gitignore
       a.bin
       b.bin
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       subdir3/

3. A closely-related filter is the ? character. This matches any single character. The rule ?.bak matches 1.bak, but not one.bak. Modify the last change to .gitignore to look like so:

   File: testgit/.gitignore

   1 2 3 4

   file1.txt subdir1/file7.txt subdir2/ ?.bak

4. Use git check-ignore to look for 1.bak:

   git check-ignore -v 1.bak

   .gitignore:4:?.bak    1.bak

5. Use git status again to confirm that one.bak is listed as untracked:

   Untracked Files:
       .gitignore
       a.bin
       b.bin
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       one.bak
       subdir3/

The Double Asterisk Symbol

The ** character matches any number of directories or files. This is often used to ignore certain files in a specific directory anywhere in the repository. For instance, the pattern **/backup/*.log matches any files ending in .log in any directory named backup.

The ** works slightly differently in different contexts. The pattern **/dirname matches all instances of the directory. The pattern dirname/**/filename matches files named filename inside dirname or any of its subdirectories.

1. Add a new line to .gitignore:

   File: testgit/.gitignore

   1 2 3 4 5

   file1.txt subdir1/file7.txt subdir2/ ?.bak **/subdir3/*.log

2. Use git check-ignore to look for the files.log file:

   git check-ignore -v subdir3/files.log

   .gitignore:5:**/subdir3/*.log    subdir3/files.log

3. Now use git status to confirm that the files.log file’s otherwise empty parent directory subdir3 is now unlisted:

   Untracked Files:
       .gitignore
       a.bin
       b.bin
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       one.bak

The Negation Symbol

The negation symbol removes some of the files or folders that match an earlier rule enforcing an ignored state. If the rule *.bin ignores all .bin files, then the rule !a.bin overrides this rule for a.bin. It tells Git to stop ignoring these files and move them back to the untracked state.

This example demonstrates how the rule !a.bin overrides the *.bin rule. The file b.bin is still ignored, but a.bin is listed as untracked.

1. Add two new lines in .gitignore:

   File: testgit/.gitignore

   1 2 3 4 5 6 7

   file1.txt subdir1/file7.txt subdir2/ ?.bak **/subdir3/*.log *.bin !a.bin

2. Use git check-ignore to look for b.bin:

   git check-ignore -v b.bin

   .gitignore:6:*.bin	b.bin

3. Now look for a.bin:

   git check-ignore -v a.bin

   .gitignore:7:!a.bin	a.bin

4. Use git status to confirm that a.bin is still untracked, but b.bin is unlisted:

   Untracked Files:
       .gitignore
       a.bin
       file2.txt
       file3.txt
       file4.txt
       file5.txt
       file6.txt
       one.bak

The Range Symbol

The square brackets [] are used to specify a numerical or alphabetical range. There are several permutations of this symbol.

• [0-9] matches any single character from the range, so any number between 0 and 9. This is the same as any single digit.
• [01] matches any character from the set, in this case, either 0 or 1.
• [!01] matches any character except the ones in the set.
• [a-m] is an alphabetic range. This range includes lower case letters from a to m.

As an example, the gitignore entry file[3-5].txt ignores file3.txt, file4.txt and file5.txt, but not file2.txt or file6.txt.

1. Add file[3-5].txt to your gitignore file:

   File: testgit/.gitignore

   1 2 3 4 5 6 7 8

   file1.txt subdir1/file7.txt subdir2/ ?.bak **/subdir3/*.log *.bin !a.bin file[3-5].txt

2. Use git status to confirm the removal of file3.txt, file4.txt, and file5.txt from the list of untracked files:

   .gitignore
   a.bin
   file2.txt
   file6.txt
   one.bak

3. Use git check-ignore to look for file3.txt:

   git check-ignore -v  file3.txt

   .gitignore:8:file[3-5].txt	file3.txt

The Comment Symbol

Any entry in the gitignore file beginning with the # symbol is a comment. Comments can help organize and explain highly complicated gitignore files.

Blank lines are also ignored. Developers can use them to separate the gitignore file into sections.

Combinations and Exceptions

There are a few puzzling exceptions to the gitignore rules. Certain patterns are also confusing. Here are some specific cases that might cause problems.

• For performance reasons, it is not possible to negate a file that belongs to an ignored directory. For example, if a rule ignores the backup directory, then Git does not acknowledge the subsequent pattern !backup/data.log. The backup/data.log file is still ignored and does not appear as an untracked file in git status.
• Prepending a directory separator / symbol to a rule indicates the rule is relative to the root directory containing the gitignore file. Without the / symbol, the rule applies everywhere in the directory.
• Patterns specifying a particular file in a certain directory are always relative to the gitignore file. This means the pattern backup/debug.log does not match the file project/backup/debug.log. This rule is equivalent to /backup/debug.log.
• Any pattern with a directory separator / symbol in the middle of a pattern is also relative to the gitignore file.
• If there is a / symbol at the end of a pattern, it only matches directories. Otherwise it matches both directories and files.
• The \ symbol is an escape character. It tells Git to treat the next character as a literal character and not a special symbol. The rule log\[05\].txt is used to ignore log[05].txt. Without the escape character, the rule would ignore log0.txt and log5.txt.

Ignoring Files in Special Circumstances

Ignoring Files Locally and Globally

The gitignore file is typically checked into the Git repository. This means it applies to every instance of the repository, but not to other repositories on the system. However, Git provides options to expand the rules to all repositories or only apply the rules locally.

• Local Repository Rules: Rules in the .git/info/exclude file only apply in the local repository. This file is not checked in, so it does not apply to other copies of the repository. This is a good choice for special rules that only apply to your personal repository, including personal data or local environments. The regular gitignore rules still apply in this context.

• Global gitignore Rules: To ignore files in all repositories on a particular system, use a global .gitignore file. Run the following command to register the file globally with Git, then add the rules to ~/.gitignore.

  git config --global core.excludesFile ~/.gitignore

Ignoring Checked-In Files

Git does not ignore any checked in files, even if they are covered by patterns in the gitignore file. To ignore a checked in file, first remove it from Git. Use this command to remove and ignore the file.

git rm --cached FILENAME

Conclusion

Git files are normally either tracked or untracked. However, Git provides a mechanism for ignoring untracked files that are not intended for check-in. This means they do not appear in the output of commands such as git status, resulting in a cleaner and better organized workspace.

Developers can ignore files and folders by adding them to the .gitignore file. gitignore is a plain text file normally located in the root directory of the repository. Powerful operators including wild card characters and exclusion characters allow users to define rules with wider or more granular scopes. For more information on how to ignore files in Git, see the Gitignore documentation.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• gitignore Documentation
• Git website